The Go-Vex convex mirror with a dinosaur scene reflected across its curve
AI concept image
Convex mirror, sold separately

Go-Vex™ mirror

The precision first-surface convex mirror inside the Newtonian™ 3, also sold on its own.

The Go-Vex™ convex mirror

The mirror behind the projection

The Go-Vex™ is a scratch-resistant, dust-repelling first-surface convex mirror with seven optical coatings for even coverage, transparency, protection against yellowing, scratch protection and dust repelling. It is the primary mirror in our Newtonian™ 3, and it also works in other mirror projection systems.

Its most critical design criterion is protection of the primary mirror during transport and while in projection mode.

How it works in the Newtonian™ 3

The projector shines onto a small flat secondary mirror, which reflects the image back to the large Go-Vex™ convex mirror. The convex curve spreads the image across the whole dome.

Built to be protected

In the Newtonian™ 3 the mirror sits inside its case. The lid closes over it for transport, and a back plate keeps dust off the mirror in storage, helping protect the optical surface between shows.

Caring for the mirror

  • Never touch the optical surface. Handle the mirror only by its protected edges, with clean cotton gloves.
  • Blow loose dust away gently with a clean photographic air blower. Never rub it dry or use paper products.
  • Ask Go-Dome for approved cleaning guidance before any further cleaning.

What to ask your distributor

Confirm the mirror size and the projector that suit your dome, and ask about replacement mirrors if you already own a mirror projection system. Replacement Go-Vex™ primary mirrors are available through Go-Dome.

At a glance

TypeFirst-surface convex mirror
CoatingsSeven optical coatings
Works withNewtonian™ 3 and other mirror projection systems
Sizes
  • Overall width: 24 3/8 in (61.9 cm)
  • Inner width: 21 5/8 in (54.9 cm)
  • Overall height: 11 7/8 in (30.2 cm)
  • Inner height: 10 5/8 in (27.0 cm)
  • Lip: 1 1/4 in (3.2 cm)
  • Depth: 6 3/8 in (16.2 cm)
Confirm the required mirror size with your distributor.
RetailPrice from your distributor
Go-Vex™ mirror size diagram. Front view: overall width 24 3/8 in (61.9 cm), inner width 21 5/8 in (54.9 cm). Side view: overall height 11 7/8 in (30.2 cm), inner height 10 5/8 in (27.0 cm), lip 1 1/4 in (3.2 cm), depth 6 3/8 in (16.2 cm).
Go-Vex™ mirror sizes, front and side views, in inches with centimeters.

Open full size

Next step

Get a quote for Newtonian™ 3 & Go-Vex™

Pricing comes from the authorized distributor for your region.